353H 3m x 2m 3.5Ton Hydraulic Tipping Trailer

353H is our largest tipping trailer, At the legal maximum 3500kg it has a good capicity.

  • Gross Weight: 3500kg
  • Unladen Weight: 860kg
  • Capacity: 2640kg
Model: 353H
Category: .

for this model

353H is our largest tipping trailer, At the legal maximum 3500kg it has a good capicity. The 10 feet long body, 6 feet 6 inches wide is very stable when tipped and does not put too much load on the back of the trailer, lifting the towing vehicle, It is not advisable to have a longer or narrower tipping trailer, at this weight, which could be unsafe if used at the maximum load.

Twin 1800kg Avonride axles have large 250mm auto-reversing brakes and low profile 195 x 13 tyres offering a low centre of gravity and low loading height. The trailer is tipped by a two stage cylinder operated by a 12v electric pump with a remote control stored in a lockable battery box.

The pump can be powered from the towing vehicle via twin power leads and a heavy duty two pin plug, or from its own battery (not supplied), which can be charged from the towing vehicle via the optional grey 7 pin auxillary plug.

30cm steel hinged sides and a spare wheel are standard and mesh extension sides with twin rear gates are available as an option.

GROSS WEIGHT 3500kg
UNLADEN WEIGHT 860kg
CAPACITY 2640kg

Dimensions and weights correct at time of writing, subject to change without notice, please contact us if these are critical.

Overall

Length 4250
Width 2000
Height -
Tow ball height 450

Dimensions and weights correct at time of writing, subject to change without notice, please contact us if these are critical.

Internal

Length 3000
Width 2000
Height 300
Platform Height 600

Dimensions and weights correct at time of writing, subject to change without notice, please contact us if these are critical.

Long draw bar Option

Factory extended draw bar with bucket hook. See 353HE

$See Link

Ramps

Ramps to enable loading machinery on your trailer. Ramp storage as standard under the rear of the trailer. Can be positioned anywhere across the rear edge to suit all machine sizes.

$550

75cm cage top

Extend above the standard sides another 75cm with wire mesh. Sides and rear open like 'barn doors'. Front headboard is replaced with a cage topped version.

$1,500


*Note: Any pricing is indicative only due to challenging international shipping and supply events outside of our control. Pricing stated does not include optional extras.