AT36 3.6m x 1.9m auto tilt platform trailer
The AT36 is an Auto tilt platform trailer suitable for machines and vehicles weighing up to 2 tons. The AT36 uses the patented principal of extending the deck rearwards by means of locking the tailboard horizontally; this extends the platform and allows the body to balance over the pivot point at the rear axle. The body can then be tilted to allow the load to be driven or winched on then the body will return to the normal position. If the valve is closed on the pump, the body will remain raised if several pieces of equipment are being loaded. When the valve is released the body will return to the horizontal position. When unloading the body is released and the tailboard lowered, the load can then be moved backwards when the body will tilt, hydraulically damped, and the load driven off. If the load is not self propelled the body can be raised with the manual pump for unloading.
All auto tilt transporter trailers are fully equipped for normal use and have a fully galvanised chassis with an 18mm phenol coated non-slip floor and load securing points. Equipment includes a front jockey wheel, auto reversing overrun brakes, full road lights, spare wheel, hitch lock, and a lockable toolbox for straps and equipment.
|Trailer weight and capacity (kg)|
|Gross weight||Unladen weight||Capacity|
|Overall dimensions (mm)|
|Internal dimensions (mm)|
|Tyre size||Tow ball height|
Even with the high standard of our trailers, maintenance is still important just like on your car.
We manufacture a range of 4 Hydraulic tipping trailers the smallest 720H does not have brakes and can be seen in the un-braked trailer section. Model 202H has a gross weight of 2000kg and can be...