35MD 3m x 1.7m 3500 kg Excavator trailer for machines up to 2790 kg
Model 35MD is a trailer designed to transport an Excavator up to 2790 kg. It is fabricated with a one piece heavy duty, hot dipped galvanised steel chassis with integral welded steel mudguards.It is supplied with open sides to enable heavy machines to be secured to the hooks welded to the chassis and without a spare wheel as standard to keep the unladen weight to a minimum, allowing the heaviest possible machines to be carried within the maximum legal weight of 3500 kg.
Model 35MD is fitted with a heavy duty full width spring assisted ramp door suitable for all types of machines including rollers.Standard equipment comprises an extended draw bar with a bucket carrier and hooks, a ribbed jockey wheel, rear stands or ramp mounted legs, stand on mudguards, full floor,road lights and a lockable 50 mm ball coupling. A pin type hitch is available as a free option.
Many special trailers have been manufactured based on the 35MD to transport all types of equipment. The lower photograph on the left shows a lighter version for transporting a 2.8 ton tracked stone crusher. A hydraulic tilt can be fitted to enable scissor type access platforms or sweeping machines with minimum ground clearance to be loaded. We would be pleased to quote for your requirements if the combination of trailer and load weigh less than 3500 kg. Trailers in excess of this weight have to have power braking, be added to your operators licence and have an annual HGV test.
|Trailer weight and capacity (kg)|
|Gross weight||Unladen weight||Capacity|
|Overall dimensions (mm)|
|Internal dimensions (mm)|
|Tyre size||Tow ball height|
Even with the high standard of our trailers, maintenance is still important just like on your car.
We manufacture a range of 4 Hydraulic tipping trailers the smallest 720H does not have brakes and can be seen in the un-braked trailer section. Model 202H has a gross weight of 2000kg and can be...