10' x 5' 6 Hydraulic tilt plant trailer

Designed to transport scissor lift platforms up to a maximum weight of 2850kg. this trailer is fitted with a hydraulic tilt to allow a very low approach angle and a feathered out ramp tailboard with support legs.The trailer has a fully welded chassis, hot dipped galvanised...

10' x 6' 2600kg, wider for larger machines

Model 1064 and the longer 1264 both have a gross weight of 2600kg allowing a payload of in excess of 2 tons, the 6 foot wide body makes them ideal for transporting larger machines or quantites of grounds maintenance equipment. The low centre of gravity and fixed sides assist...

2600kg Mini Excavator trailer for machines up to 2100kg

Model 26MD is a trailer designed to transport a Mini Excavator up to 2100kg. or normally a 1.5 ton excavator with extra buckets and equipment. It is fabricated with a heavy duty hot dipped galvanised box steel chassis with integral welded steel mudguards suitable for standing...

3500 kg Excavator trailer for machines up to 2790 kg

Model 35MD is a trailer designed to transport an Excavator up to 2790 kg. It is fabricated with a one piece heavy duty, hot dipped galvanised steel chassis with integral welded steel mudguards.It is supplied with open sides to enable heavy machines to be secured to the hooks...

8' x 4' Hydraulic Tilt Plant Trailer

26 TP is designed to carry access platforms and low ground clearance machines up to 2 tons. It has a hydraulic tilt, galvanised body and a spring assisted ramp door with a feathered...

8' x 5' Twin axle general purpose trailer

In common with all the general purpose trailers in this range, Model 0854 has a hot dipped galvanised steel chassis with 2mm thick pre-galvanised steel sides 300mm deep and an 18mm phenol coated non-slip plywood floor.The independent rubber suspension axles have auto...